In this tutorial, we will go over how to connect an Analog Discovery 2 USB Oscilloscope to LabVIEW.
How to use the logic analyzer with a SPI demo on the Basys 3 as an example.
This project allows you to control a fan and a servo over WiFi with LabVIEW.
This tutorial describes the process of setting up a Raspberry Pi as a LabVIEW target using LINX.
Controlling LEGO Mindstorms NXT motors and sensors from a myRIO using LabVIEW to create a robot base.
Use the Analog Discover 2 as an affordable, compact and lightweight oscilloscope.
Using LabVIEW 2014 and LINX 3.0, we created two wirelessly controlled Sumobots.
An introduction to LINX 3.0 which adds the ability to deploy LabVIEW code to run on BeagleBone Black and Raspberry Pi 2 and 3.
Predictive analysis of machine vibration and temp by creating mail events and a record of vibration in google sheet using ThingSpeak.
For this project, I used LabVIEW to create a Raspberry Pi controlled Sumobot.
Build an analog theremin using only the Analog Discovery 2, the Digilent Analog Parts Kit, and your choice of an empty beverage can!
This tutorial describes the process of setting up a BeagleBone Black as a LabVIEW target using LINX.
Use the Analog Discovery 2 network analyzer and Waveforms 2015 to get a better idea of how circuits responds to various types of inputs.
This project uses a tablet running Data Dashboard and a Raspberry Pi to wireless control a WF32 fan set up.
myWingMan is a quadrotor drone, which is controlled by the movement of your hands, built with low-cost, commercial tech.
Preamble is a signal used in network communications to synchronize transmission timing between two or more systems.
I have created a graphical user interface for LIRC that allow you to control you Raspberry Pi universal remote with LabVIEW.
A six-legged robot spider that can walk, balance and display sweet visuals on an LED array.
Fault in induction motors can lead to abnormal vibrations in the machine. Vibrational analysis can resolve these faults.
This tutorial describes the process of setting up the development software (LabVIEW and LINX) on the host PC.
My unboxing experience of the Analog Discovery 2.
Remote controlled relays using Bluetooth HC-05, PIC microcontoller and LabVIEW.
In this guide, I will show how to measure harmonics in signal with Analog Discovery 2 using FFT contained in Digilent WaveForms.
This project aims to create transmission line between two links using FPGA cards and solve the synchronization problems with ADPLL.