myWingMan is a quadrotor drone, which is controlled by the movement of your hands, built with low-cost, commercial tech.
I have created a graphical user interface for LIRC that allow you to control you Raspberry Pi universal remote with LabVIEW.
A six-legged robot spider that can walk, balance and display sweet visuals on an LED array.
In this guide, I will show how to measure harmonics in signal with Analog Discovery 2 using FFT contained in Digilent WaveForms.
This tutorial describes the process of setting up the development software (LabVIEW and LINX) on the host PC.
This project aims to create transmission line between two links using FPGA cards and solve the synchronization problems with ADPLL.
My unboxing experience of the Analog Discovery 2.
We created a vi that can synthesizes different instrument sounds by generating different ADSR envelopes. Then deployed vi on the BeagleBone.
Calibrate the Analog Discovery 2 so you can ensure you are making the most accurate measurements possible.
Remote controlled relays using Bluetooth HC-05, PIC microcontoller and LabVIEW.
NI-USRP (SDR) whcih support RF communication of 70MHz to 6GHz is used for reception of FM Radio using LabVIEW.
Pinpoint both internal and external trouble spots with the Analog Discovery 2's spectrum analyzer to improve the performance of your device
Create LabVIEW Web Services to provide an easy way to connected your embedded LabVIEW application to browser based GUI.
This tutorial describes the process of creating a startup executable from a VI and deploying it to run each time the LINX device starts.
This tutorial describes the process for blinking an LED on the BeagleBone Black or Raspberry Pi 2/3 by creating a LabVIEW application.
In this project, we will measure vibration and temperature using NCD vibration and temperature sensor, ESP32, and Ubidots.
In my project, I used LabVIEW to interface with 3 Pmod ENC's connected to a WF32 to control a LabVIEW project I made called LabForms.
This exercise will show you how to use your Analog Discovery 2 to verify what the signal looks like from an Arduino PWM pin in LabVIEW.
A data logger is similar to an oscilloscope, but is used to register data over relatively long periods of time.
Increase the fault tolerance of heat exchanger using a wireless temperature and humidity sensor.
Visualize sensor data on your websites and web pages using Google Charts. An interactive way for sensor data analysis.
Bundle multiple tools together in one small package, including an adjustable power supply, with the Analog Discovery 2 and Waveforms 2015.
low-cost, cloud-enabled medical monitor for bedside monitoring on iPad or desktop and cloud data logging for future analysis
This exercise will show you how to use your OpenScope MZ to read the output of a first order RC circuit.