NI-USRP (SDR) whcih support RF communication of 70MHz to 6GHz is used for reception of FM Radio using LabVIEW.

Pinpoint both internal and external trouble spots with the Analog Discovery 2's spectrum analyzer to improve the performance of your device

Create LabVIEW Web Services to provide an easy way to connected your embedded LabVIEW application to browser based GUI.

This tutorial describes the process of creating a startup executable from a VI and deploying it to run each time the LINX device starts.

This tutorial describes the process for blinking an LED on the BeagleBone Black or Raspberry Pi 2/3 by creating a LabVIEW application.

In this project, we will measure vibration and temperature using NCD vibration and temperature sensor, ESP32, and Ubidots.

In my project, I used LabVIEW to interface with 3 Pmod ENC's connected to a WF32 to control a LabVIEW project I made called LabForms.

This exercise will show you how to use your Analog Discovery 2 to verify what the signal looks like from an Arduino PWM pin in LabVIEW.

Add Sensors and device control quickly and easily to LabView without having to add any drivers!

A data logger is similar to an oscilloscope, but is used to register data over relatively long periods of time.

Increase the fault tolerance of heat exchanger using a wireless temperature and humidity sensor.

Visualize sensor data on your websites and web pages using Google Charts. An interactive way for sensor data analysis.

Bundle multiple tools together in one small package, including an adjustable power supply, with the Analog Discovery 2 and Waveforms 2015.

low-cost, cloud-enabled medical monitor for bedside monitoring on iPad or desktop and cloud data logging for future analysis

This exercise will show you how to use your OpenScope MZ to read the output of a first order RC circuit.

Predictive analysis of machine vibration and temp by creating mail events and a record of vibration in google sheet using Ubidots.

In this project, we will measure vibration and temperature using NCD vibration and temperature sensor, ESP32, and ThingSpeak.

The goal for this project is to control the position of a ball on a beam that is actuated by a motor while using 5 LED lights as indicator.

This guide will show you how to make a physical interface for LabVIEW.

This project consists of making a logical analyzer, which can help us analyze digital hardware and software analysis.

Imagine a 'foosball table' that autonomously calculates LIVE match statistics, such as goal scores, ball possession, successful passes, shot

We finished the Cobra MiniSumo chassis build in part 1 of this project. Let's add some brain power this time.

What do you get when you put together some wind chimes, a bunch of solenoids, a myRIO and a block of dry ice? Some very cool music!

Sense or generate change-of-state instances with the Analog Discovery 2's 16 channel I/O.