Pet feeder is for people who live with pet(s) to help them feed their pets when they are not at home.
Review of the "ELEGOO Mega 2560 The Most Complete Starter Kit Compatible With Arduino IDE". Starter kit with more than 200pcs components
How to connect an Analog Discovery 2 USB Oscilloscope to LabVIEW, using LabForms 2.0.
Exploring pulse width modulation, pulse density modulation, and digital to analog conversion using the Analog Discovery 2 and Waveforms!
The HDrive is an easy to use IoT-enabled servo drive, both for the inexperienced and for professionals.
This project will show how to use your OpenScope MZ in LabVIEW.
Creating a LabVIEW Data Dashboard to interact with your embedded LabVIEW application from your Android or iOS tablet.
In this tutorial, we will go over how to connect an Analog Discovery 2 USB Oscilloscope to LabVIEW.
This project allows you to control a fan and a servo over WiFi with LabVIEW.
This tutorial describes the process of setting up a Raspberry Pi as a LabVIEW target using LINX.
Use the Analog Discover 2 as an affordable, compact and lightweight oscilloscope.
Build an analog theremin using only the Analog Discovery 2, the Digilent Analog Parts Kit, and your choice of an empty beverage can!
An introduction to LINX 3.0 which adds the ability to deploy LabVIEW code to run on BeagleBone Black and Raspberry Pi 2 and 3.
This tutorial describes the process of setting up a BeagleBone Black as a LabVIEW target using LINX.
In this guide, I will show how to measure harmonics in signal with Analog Discovery 2 using FFT contained in Digilent WaveForms.
I have created a graphical user interface for LIRC that allow you to control you Raspberry Pi universal remote with LabVIEW.
This project uses a tablet running Data Dashboard and a Raspberry Pi to wireless control a WF32 fan set up.
This tutorial describes the process of setting up the development software (LabVIEW and LINX) on the host PC.
NI-USRP (SDR) whcih support RF communication of 70MHz to 6GHz is used for reception of FM Radio using LabVIEW.
My unboxing experience of the Analog Discovery 2.
Remote controlled relays using Bluetooth HC-05, PIC microcontoller and LabVIEW.
Create LabVIEW Web Services to provide an easy way to connected your embedded LabVIEW application to browser based GUI.
This tutorial describes the process for blinking an LED on the BeagleBone Black or Raspberry Pi 2/3 by creating a LabVIEW application.
This tutorial describes the process of creating a startup executable from a VI and deploying it to run each time the LINX device starts.