How to connect an Analog Discovery 2 USB Oscilloscope to LabVIEW, using LabForms 2.0.

This project will show how to use your OpenScope MZ in LabVIEW.

In this tutorial, we will go over how to connect an Analog Discovery 2 USB Oscilloscope to LabVIEW.

Use the Analog Discover 2 as an affordable, compact and lightweight oscilloscope.

Build an analog theremin using only the Analog Discovery 2, the Digilent Analog Parts Kit, and your choice of an empty beverage can!

In this guide, I will show how to measure harmonics in signal with Analog Discovery 2 using FFT contained in Digilent WaveForms.

My unboxing experience of the Analog Discovery 2.

This exercise will show you how to use your Analog Discovery 2 to verify what the signal looks like from an Arduino PWM pin in LabVIEW.

A data logger is similar to an oscilloscope, but is used to register data over relatively long periods of time.

Bundle multiple tools together in one small package, including an adjustable power supply, with the Analog Discovery 2 and Waveforms 2015.

This exercise will show you how to use your OpenScope MZ to read the output of a first order RC circuit.

Using LINX toolkit in Labview

Will show you how to use AD2 to debug the UART protocol.