Will show you how to use AD2 to debug the UART protocol.

Review of the "ELEGOO Mega 2560 The Most Complete Starter Kit Compatible With Arduino IDE". Starter kit with more than 200pcs components

In my project, I used LabVIEW to interface with 3 Pmod ENC's connected to a WF32 to control a LabVIEW project I made called LabForms.

Exploring pulse width modulation, pulse density modulation, and digital to analog conversion using the Analog Discovery 2 and Waveforms!

Build an analog theremin using only the Analog Discovery 2, the Digilent Analog Parts Kit, and your choice of an empty beverage can!

Bundle multiple tools together in one small package, including an adjustable power supply, with the Analog Discovery 2 and Waveforms 2015.

In this tutorial, we will go over how to connect an Analog Discovery 2 USB Oscilloscope to LabVIEW.

A data logger is similar to an oscilloscope, but is used to register data over relatively long periods of time.

My unboxing experience of the Analog Discovery 2.

Use the Analog Discover 2 as an affordable, compact and lightweight oscilloscope.

I have created a graphical user interface for LIRC that allow you to control you Raspberry Pi universal remote with LabVIEW.

Application notes for Pmod OD1 and Arduino Uno. In this app, the motor will be programmed to accelerate & decelerate at specific intervals.

Detect colors in images or in real time

Using LINX toolkit in Labview

This is a robot car design based on myRIO

This tutorial will teach you how to use Digilent's Pmod interfaces in LabVIEW.

How to connect an Analog Discovery 2 USB Oscilloscope to LabVIEW, using LabForms 2.0.

Add Sensors and device control quickly and easily to LabView without having to add any drivers!

This will walk you through how to use the PCB Ruler to measure things that are longer than the maximum measuring capacity of the ruler.

This is an introduction into LabVIEW 2014 and the basics on how to get started making a project, building your own VIs and more

In this guide, I will show how to measure harmonics in signal with Analog Discovery 2 using FFT contained in Digilent WaveForms.

NI-USRP (SDR) whcih support RF communication of 70MHz to 6GHz is used for reception of FM Radio using LabVIEW.

Remote controlled relays using Bluetooth HC-05, PIC microcontoller and LabVIEW.

This project uses a tablet running Data Dashboard and a Raspberry Pi to wireless control a WF32 fan set up.