Review of the "ELEGOO Mega 2560 The Most Complete Starter Kit Compatible With Arduino IDE". Starter kit with more than 200pcs components
Generate a sound described by Fourier Analysis coefficients. FPGA gives a possibility of generating complex sounds in real time.
How to make a homemade electrocardiograph (ECG).
Solid State Precharge CoolMOS solution for automotive HV battery.
How to create and leverage embedded Linux in small FPGAs using MicroBlaze
How to connect an Analog Discovery 2 USB Oscilloscope to LabVIEW, using LabForms 2.0.
Exploring pulse width modulation, pulse density modulation, and digital to analog conversion using the Analog Discovery 2 and Waveforms!
Create a hospitality robot that is capable of interacting with visitors at public spaces such as malls, rec centers, hospitals, stadium etc.
How to use the logic analyzer with a SPI demo on the Basys 3 as an example.
In this tutorial, we will go over how to connect an Analog Discovery 2 USB Oscilloscope to LabVIEW.
Use the Analog Discover 2 as an affordable, compact and lightweight oscilloscope.
Build an analog theremin using only the Analog Discovery 2, the Digilent Analog Parts Kit, and your choice of an empty beverage can!
Preamble is a signal used in network communications to synchronize transmission timing between two or more systems.
Use the Analog Discovery 2 network analyzer and Waveforms 2015 to get a better idea of how circuits responds to various types of inputs.
In this guide, I will show how to measure harmonics in signal with Analog Discovery 2 using FFT contained in Digilent WaveForms.
This project aims to create transmission line between two links using FPGA cards and solve the synchronization problems with ADPLL.
Calibrate the Analog Discovery 2 so you can ensure you are making the most accurate measurements possible.
Pinpoint both internal and external trouble spots with the Analog Discovery 2's spectrum analyzer to improve the performance of your device
My unboxing experience of the Analog Discovery 2.
In my project, I used LabVIEW to interface with 3 Pmod ENC's connected to a WF32 to control a LabVIEW project I made called LabForms.
This exercise will show you how to use your Analog Discovery 2 to verify what the signal looks like from an Arduino PWM pin in LabVIEW.
A data logger is similar to an oscilloscope, but is used to register data over relatively long periods of time.
Bundle multiple tools together in one small package, including an adjustable power supply, with the Analog Discovery 2 and Waveforms 2015.
Application notes for Pmod OD1 and Arduino Uno. In this app, the motor will be programmed to accelerate & decelerate at specific intervals.