This is an introduction into LabVIEW 2014 and the basics on how to get started making a project, building your own VIs and more
This will walk you through how to use the PCB Ruler to measure things that are longer than the maximum measuring capacity of the ruler.
We finished the Cobra MiniSumo chassis build in part 1 of this project. Let's add some brain power this time.
We created a vi that can synthesizes different instrument sounds by generating different ADSR envelopes. Then deployed vi on the BeagleBone.
Controlling LEGO Mindstorms NXT motors and sensors from a myRIO using LabVIEW to create a robot base.
NI-USRP (SDR) whcih support RF communication of 70MHz to 6GHz is used for reception of FM Radio using LabVIEW.
Remote controlled relays using Bluetooth HC-05, PIC microcontoller and LabVIEW.
For this project, I used LabVIEW to create a Raspberry Pi controlled Sumobot.
LattePanda and National Instruments LabView
What do you get when you put together some wind chimes, a bunch of solenoids, a myRIO and a block of dry ice? Some very cool music!
Graphical Systems Design approach to controlling the Renaissance Robotics eduMIP with LabVIEW
low-cost, cloud-enabled medical monitor for bedside monitoring on iPad or desktop and cloud data logging for future analysis
Exploiting the persistence of vision quirk of the human eye, myGlobe uses a single strip of 25 LEDs to draw any image in thin air.
Now with 5 exciting modes of operation: music equaliser, 2-player pong, animator, spirit level and voltage display.
myWingMan is a quadrotor drone, which is controlled by the movement of your hands, built with low-cost, commercial tech.
The goal of this project was to create a space where an individual can maximize their focus capabilities, even if just for a short time.
Or connect with your social account:
New here? Create an account