myWingMan is a quadrotor drone, which is controlled by the movement of your hands, built with low-cost, commercial tech.

Graphical Systems Design approach to controlling the Renaissance Robotics eduMIP with LabVIEW

Remote controlled relays using Bluetooth HC-05, PIC microcontoller and LabVIEW.

For this project, I used LabVIEW to create a Raspberry Pi controlled Sumobot.

LattePanda and National Instruments LabView

low-cost, cloud-enabled medical monitor for bedside monitoring on iPad or desktop and cloud data logging for future analysis

We created a vi that can synthesizes different instrument sounds by generating different ADSR envelopes. Then deployed vi on the BeagleBone.

What do you get when you put together some wind chimes, a bunch of solenoids, a myRIO and a block of dry ice? Some very cool music!

Controlling LEGO Mindstorms NXT motors and sensors from a myRIO using LabVIEW to create a robot base.

This is an introduction into LabVIEW 2014 and the basics on how to get started making a project, building your own VIs and more

We finished the Cobra MiniSumo chassis build in part 1 of this project. Let's add some brain power this time.

Now with 5 exciting modes of operation: music equaliser, 2-player pong, animator, spirit level and voltage display.

Exploiting the persistence of vision quirk of the human eye, myGlobe uses a single strip of 25 LEDs to draw any image in thin air.

The goal of this project was to create a space where an individual can maximize their focus capabilities, even if just for a short time.

This will walk you through how to use the PCB Ruler to measure things that are longer than the maximum measuring capacity of the ruler.

NI-USRP (SDR) whcih support RF communication of 70MHz to 6GHz is used for reception of FM Radio using LabVIEW.