The goal for this project is to control the position of a ball on a beam that is actuated by a motor while using 5 LED lights as indicator.

Application notes for Pmod OD1 and Arduino Uno. In this app, the motor will be programmed to accelerate & decelerate at specific intervals.

This project involved using an accelerometer chip and an Orange Pi to wirelessly control a small car.

Using a TI F28379D Launchpad and a plastic recorder we coded a robot to move. Using WiFi an ESP8266 sent the notes to LABView on a computer.

We built a line-following balancing robot that uses computer vision and IR sensors to follow a line and detect obstacles.

Breanna Chan and Brenna Kelly's final project for ME 461

An autonomous robot that line follows and moves 'snowballs' in its path out of the way and then continues lane following. Mimics a snowplow.

A tone-detecting, line-following, break-dancing robot car!

lean, mean, golf-ball-collecting, obstacle-avoiding, a*-path-planning, machine!

Sending a 2D line drawing to a robot to draw the line