The HDrive is an easy to use IoT-enabled servo drive, both for the inexperienced and for professionals.
Create a hospitality robot that is capable of interacting with visitors at public spaces such as malls, rec centers, hospitals, stadium etc.
This tutorial describes the process of setting up a Raspberry Pi as a LabVIEW target using LINX.
Using LabVIEW 2014 and LINX 3.0, we created two wirelessly controlled Sumobots.
This tutorial describes the process of setting up a BeagleBone Black as a LabVIEW target using LINX.
A six-legged robot spider that can walk, balance and display sweet visuals on an LED array.
Remote controlled relays using Bluetooth HC-05, PIC microcontoller and LabVIEW.
Detect colors in images or in real time
The goal for this project is to control the position of a ball on a beam that is actuated by a motor while using 5 LED lights as indicator.
We finished the Cobra MiniSumo chassis build in part 1 of this project. Let's add some brain power this time.
Application notes for Pmod OD1 and Arduino Uno. In this app, the motor will be programmed to accelerate & decelerate at specific intervals.
This project involved using an accelerometer chip and an Orange Pi to wirelessly control a small car.
Compute address, wildcard, network address based on IP and subnet mask
Dot detection using webcam
Feeling lost? Help is never far away in LabVIEW.
Using a TI F28379D Launchpad and a plastic recorder we coded a robot to move. Using WiFi an ESP8266 sent the notes to LABView on a computer.
Breanna Chan and Brenna Kelly's final project for ME 461
We built a line-following balancing robot that uses computer vision and IR sensors to follow a line and detect obstacles.
A tone-detecting, line-following, break-dancing robot car!
An autonomous robot that line follows and moves 'snowballs' in its path out of the way and then continues lane following. Mimics a snowplow.
Sending a 2D line drawing to a robot to draw the line